Weller HAP 200 - Manual (Page 2)

2-6 HAP 200
Thank you for placing your trust in our company by purchasing the
Weller HAP 200 Hot Air Tool.
This product meets or exceeds the requirements established by
Weller for superior performance, versatility and quality.
1.
Cautions! / Warnings!
Please read these Operating Instructions and the attached Safety
Information carefully prior to initial operation. Failure to observe the
safety warnings may result in accident, injury, or risk to health.
The manufacturer shall not be liable for damage resulting from
misuse of the machine or unauthorized alterations.
Warning: This product when used for soldering and similar
applications, produces chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
Safety Information:
Always place the Hot Air Tool in its original holder
Remove all inflammable objects from the proximity of the hot air
tool.
Use suitable protective clothing to prevent the risk of burns
associated with molten solder.
Never leave the HAP 200 unattended.
Never work on electrically live circuits or components.
Always wear eye protection when working with soldering and
desoldering applications.
The Weller HAP 200 Hot Air Tool corresponds to the EC Declaration
of Conformity in accordance with the basic safety requirements of
Directives 89/336/EEC and 73/23EEC.
1.1 Applicable Documents
• HAP 200 Operating Instructions
• Accompanying booklet on safety
• Operating instructions of your control unit