Weller BP645MP - Manual

BP645MP Cordless
Battery Powered
Soldering Tool
Thank you for purchasing the BP645MP battery
powered cordless soldering tool from Weller
® . This
is the latest in a line of both cordless and corded
soldering and hot air tools from Weller – the world’s
leading maker of soldering products. With proper
care, your BP645MP tool will give you years of reli-
able service.
BP645MP is a lightweight, fast heat-up soldering
iron ideal for field service work where electricity is
not readily available. The heating element coil is
contained in the tip for super-fast heat-up. Use this
tool for light duty soldering jobs where portability is
necessary.
Safety Notes
1. Tip is HOT! Do not touch the tip or you may get
severely burned.
2. Do not immerse in water!
3. Allow the tip to cool after use before storing away.
4. Place the protective cover over the tip when storing
so that the cover secures the safety slide switch
in the “Off” position.
5. Warning: This product contains, or when used for
soldering and similar applications produces chemi-
cals known to the State of California to cause
cancer and birth defects (or other reproductive
harm).
Operating Instructions
1. To install batteries, remove the battery cover by
pinching the clips on the sides of the battery
cover and lifting off.
2. Place (3) 1.5V size AA alkaline batteries (included)
into the iron as illustrated and replace the cover.
3. Remove the protective cover from the tip.
4. Make sure the tip is securely installed.
5. Slide the On/Off switch to the “On” position.
6. Hold the soldering iron like a pen. Press and hold
the round button on top of the On/Off slide switch
continuously. The iron heats up to solder melting
point in about 15 seconds.
7. To extend battery life, only press the button when
soldering.
8. Place the hot soldering iron standing upright so
the tip does not come in contact with surrounding
objects.
9. After soldering, slide the switch to the “OFF” posi-
tion and replace the protective cover
Maintenance
1. If it takes more than 30 seconds to reach working
temperature, install fresh batteries.
2. Use alkaline batteries for best results. Do not mix
old and new batteries.
3. Do not change the soldering tip when hot. Use
the tip exchanger provided to remove the tip as
shown.
4. The soldering tip is iron plated for long life. Do
not file the tip as filing will destroy the plating.
5. Remove the batteries from the tool when not
using for prolonged periods to prevent batteries
from leaking into the tool.
Weller ® Consumer Soldering Iron Warranty
Cooper Hand Tools warrants this product will be free
from defects in material and workmanship for a peri-
od of seven (7) years from the date of purchase. No
warranty is made with respect to products which
have been (a) altered, modified or repaired by any-
one other than Cooper Hand Tools; (b) subject to
abuse, improper use, negligence, accident or
improper storage; (c) installed, used or maintained
not in accordance with normal practices or the
instructions and specifications of Cooper Hand
Tools; or (d) used in conjunction with any product,
device, component or system, that is either defec-
tive, the source of a defect, or not reasonably intend-
ed to be used in conjunction with this product.
The foregoing limited warranty is exclusive and in
lieu of all other warranties, whether expressed,
implied or statutory, including, but not limited to,
any warranty of merchantability or fitness for any
particular purpose. The obligation of Cooper Hand
Tools under this limited warranty is expressly limited
to repairing the product, refunding the purchase
price or replacing the product, at the sole and
absolute discretion of Cooper Hand Tools, at no
charge to Buyer.
The remedies provided for herein shall constitute the
sole recourse of Buyer against Cooper Hand Tools,
whether the claim is made in tort or in contract,
including claims based on warranty, negligence,
strict liability, deceit, fraud, misrepresentation or
otherwise. In no event shall Cooper Hand Tools be
liable for special, indirect, incidental or consequen-
tial damages (regardless of the form of action), nor
for lost profits. Cooper Hand Tools liability for any
claims or damages arising out of or connected with
the manufacture, sale, delivery, use, maintenance,
repair or modification of this product shall not
exceed its purchase price.
Cooper Hand Tools will, during the warranty period,
repair, replace or refund the purchase price of any
product found to be defective in accordance with
this limited warranty. Return freight prepaid with
proof of purchase to: For USA; Cooper Hand Tools,
1000 Lufkin Road, Apex, NC 27539.
USER’S GUIDE PLEASE READ BEFORE OPERA TING
GUIDE D’UTILISATION
PRIÉRE DE LIRE AV ANT L ’UTILSA TION
MANUAL DEL USU ARIO
LÉASE ANTES DE USAR LA HERRAMIENT A
BP645MP Cordless Batter yPowered
Soldering Tool
1000 Lufkin Road, Apex, NC 27539
www.cooper handtools.com