Wildview STC-TGL-3 - Manual (Page 11)

STC-TGL3M
www.wildviewcam.com Toll Free 888-304-6125 11
• To remove the SD memory card, depress the SD
card and pull out the card gently.
SD cards must be clean (no images from other
sources.)
Definition
• Time out: To set the amount of preset time in
minutes the camera will sleep between PIR triggering
• Resolution: The resolution selection that you have
selected.
o High: Select this option to capture a 3.1M pixel
image quality
o Low: Select this option to capture a 1.3M pixel
image quality
• Date/Time: To set date and time stamp in the picture
• Flash: Auto / On / Off mode