Wildview STC-TGL-3 - Manual (Page 24)

STC-TGL3M
www.wildviewcam.com Toll Free 888-304-6125 24
or [DN] until screen shows “ESC” then press
[SET] again to exit.
d. This will only delete the last image saved in
the memory.
o Delete All picture:
a. Press [SET] button to enter delete setting.
Display will show “ESC”
b. Press [UP] or [DN] to select d-ALL (delete all)
c. Press [SET] to delete all images and display
will show “DONE” and exit to count down
mode automatically.
o Format:
a. Press [SET] button to enter delete setting.
Display will show “ESC”
b. Press [UP] or [DN] to select Ft (format)
c. Press [SET] to confirm and display will show
“DONE” and exit to count down mode
automatically.