Wildview STC-TGL-3 - Manual (Page 15)

STC-TGL3M
www.wildviewcam.com Toll Free 888-304-6125 15
h. Press and hold [SET] button for 2 seconds to exit
the setting mode and into PIR count down mode.
Display will show date and number of picture
taken.
Once the program setting has been completed, slide
the power switch to OFF position until you are ready
for field use.
NOTE: Date & Time setting will be lost whenever battery
is removed from camera. Don’t forget to re-set the Date
& Time stamp after you replace the battery.