Wildview STC-TGL-3 - Manual (Page 23)

STC-TGL3M
www.wildviewcam.com Toll Free 888-304-6125 23
Saving and Deleting images
SAVING IMAGES
To save images on to your PC, simply copy and paste, or
drag and drop from the SDRAM memory to your PC desk
top.
DELETING IMAGES
There are two ways to delete the images from the
internal SDRAM memory.
1. After you down load image into your desk top, you
can delete the image in the SDRAM: Unplug the USB
Cable from camera. Slide the power switch to PIR
position. LCD screen will display the number of
images captured in the memory.
o Delete One picture:
a. Press [SET] button to enter delete setting.
Display will show “ESC”
b. Press [UP] or [DN] to select d-ONE (delete
one)
c. Press [SET] to delete the image. Press [UP]