Quoizel NA1716BN New England - Manual (Page 2)

STEP 1:
a Thread the Center Stem into the Hex Coupling on the top
center of the Socket Assembly as shown. Using plier,
thread Hex Nut against the Hex Coupling and hand tighten
until snug.
.
STEP 2:
a Locate the Spacer Tube, the Wheel Part and the Ceiling
Canopy over the top end of the Center Stem in turn.
Secure by threading Lock Washer (1/8IP) and Hex Nut
(1/8IP) onto the Center Stem. Hand tighten until snug.
.
STEP 4:
a Locate the Shade inside of the Shade Holder.
b. Lift the Shade Holder with Shade upward, line up mounting
holes on the Wedge and holes on the Fixture Pan. Thread
Lock Screws into mounting holes on Wedges and tighten
until snug to secure the Shade.
.
INSTALLATION INSTRUCTIONS
STYLE NUMBER NA1716BN :
Center Stem
with Hex Nut
Center Stem
Shade
Lock
Screw
Spacer Tube
Wheel Part
Ceiling
Canopy
Hex Coupling
Socket
Assembly
Hex Nut (1/8IP)
Lock Washer
(1/8 IP)
Shade Holder
Wedge
Fixture Pan
2 OF 3
STEP 3:
a Install correct bulbs referring to fixture markings and or labels for maximum wattage . / .