Adding additional displays (cascade mode), Adding additional displays (cascade mode) -7 – ClearOne PAN6400 User Manual
Page 43
Integrating Panorama with DigiLinX
5-7
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
17.
Connect 5.1 or 7.1 channel speakers from the output ports of the A/V Receiver.
18.
Connect CAT5 Ethernet cables from each MediaLinX, TouchLinX, and
SpeakerLinX and from the ControLinX to the SwitchLinX-managed Ethernet
switch. This provides the DigiLinX devices with network connectivity.
19.
Continue connecting the rest of the DigiLinX system as per the DigiLinX Design &
Installation Guide.
20.
Turn power on to all devices.
Adding Additional Displays (Cascade Mode)
One DigiLinX system and one NetStreams Panorama system together provide for the
distribution of four audio and video sources to as many as six zones. For the
distribution of four sources to more than six zones, integrate additional Panorama
PAN6400 VDC and ControLinX pairs.
Connect each additional PAN6400 VDC and ControLinX with a 3.5 mm to RS-232
cable and connect the PAN6400 VDCs with null modem RS-232 cables. Connect
video sources from the video OUT ports of the primary VDC to the video IN ports of
the secondary VDC.