Wheatheart Swing Away Auger (10 & 13) - Manual (Page 27)

W HEATHEART - SA A UGERS 5. M AINTENANCE
SA 1061, 1071, 1081, 1091, 1371, 1381, 1391 5.1. F LUIDS AND L UBRICANTS
30582 R7 27
5. Maintenance
5.1. FLUIDS AND LUBRICANTS
G EAR O IL
Use SAE approved 90W or equivalent gear oil.
G REASE
Use SAE multi-purpose high-temperature grease with extreme pressure (EP)
performance or SAE multi-purpose lithium-based grease.
5.2. MAINTENANCE INTERVALS
For details of service, refer to Section 5.3.
Warning: Before continuing, please reread the safety information relevant to this section at
the beginning of this manual. Failure to follow the safety instructions can result in serious
injury, death, or property damage.
NOTICE
Do not modify equipment.
Unauthorized modification may impair the function or safety
of the equipment, could affect the life of the equipment, and
will void your warranty.
SECTION DAILY
(8000
BU) PERIODICALLY
(40,000 BU) BEFORE
STORAGE AFTER
STORAGE 3-5 YEARS
(DEPENDING
ON USE)
VISUALLY INSPECT THE UNIT 5.3.1. Y Y
INSPECT HYDRAULIC HOSE
AND COUPLER 5.3.2. Y
GREASE MACHINE 5.3.3. Y Y
INSPECT HOPPER LIFT
CABLE 5.3.4. Y
SERVICE WINCH AND
PULLEYS 5.3.5. Y
SERVICE BOOT AND HOPPER
CHAIN DRIVE • Y
CHECK GEARBOX OIL LEVEL 5.3.7. Y
CLEAN MACHINE 5.3.8. Y
CHECK TIRE PRESSURE 5.3.9. Y Y
REPACK WHEEL BEARINGS 5.3.10. Y
TIGHTEN WHEEL BOLTS 5.3.11. Y
SERVICE TRUSS CABLES 5.3.12. Y
CHANGE GEARBOX OIL 5.3.13. Y