Wheatheart Self-Propelled Post Pounder Kit - Manual (Page 17)

W HEATHEART - S ELF -P ROPELLED P OST P OUNDER K IT 3. O PERATION
T RAILER P OST P OUNDER M ODEL 3.2. T RANSPORT P REPARATION
IM12 R3 17
Figure 3.4
3.2. TRANSPORT PREPARATION
1. Remove the safety pin under the hitch and lift
the arm up into transport mode (Figure 3.3).
Replace pin.
2. Fully disengage the wheel drive over-centers
(Figure 3.5) and lock into position with the
chain lock.
3. Raise spike and install cylinder lock with

1/4” X 3” locking pin (see Figure 3.6).
4. Adjust valve position by loosening the
appropriate bolt. Swing into transport position
and lock in place.
SPIKE
RIGHT DRIVE WHEEL
LEFT DRIVE WHEEL
Figure 3.5
CHAIN LOCK