Great Plains CF600 Operator Manual - Manual (Page 20)

CF500 and CF600
506-582M 2012-04-20
18
Operating Instructions
This section covers general operating proce-
dures. Experience, machine familiarity and the
following information will lead to efficient opera-
tion and good working habits. Always operate
farm machinery with safety in mind.
Prestart Checklist
1. Read and follow “Important Safety Informa-
tion,” beginning on page 1.
2. Read and follow the chemical manufacturer’s
instructions. Consider how you will store and
dispose of the chemical.
3. When working with agricultural chemicals, al-
ways wear protective, waterproof clothing that
covers the body.
4. Have soap and water available to wash any
exposed areas. Check that hand-wash tank is
full of clean water.
5. Lubricate boom as indicated under “Lubrica-
tion,” page 30.
6. Check boom for loose bolts, pins and hose
clamps. Check hoses, pumps, valves and fit-
tings for leaks. Tighten all bolts as specified
under “Torque Value Chart,” page 33.
Field Operation
!
DANGER!
Electrocution hazard. To prevent serious injury or
death from electric shock, keep clear of overhead pow-
er lines when transporting, folding or unfolding boom.
Boom is not grounded. Electrocution can occur with-
out direct contact. Refer to transport dimensions under
“Specifications and Capacities,” page 32. Do not fold
or unfold boom while tractor is moving.
18098