Great Plains EWF13 Assembly Instructions - Manual (Page 2)

2
Assembly Instructions
EWD13 and EWF13 Sprocket Box Update 152-208M 5/2/06
Great Plains Mfg., Inc.
Refer to Figure 1-3.
3. Disassemble acremeter. Unscrew acremeter (1) off shaft.
Remove the 5/16-inch bolts (2), washers and nuts (3). Re-
move bearings (4). Save acremeter, bolts, washers, nuts
and bearings for later reinstallation.
16507
Figure 1-3
Acremeter Disassembly
Refer to Figure 1-4.
4. Remove jackshaft. Remove snap ring and miter gear (1)
from gearbox end of shaft. Disconnect clutch link arm (2)
from clutch (3). Slide shaft (4) out of bearings, clutch and
side wall. Save clutch for later reinstallation.
16508
Figure 1-4
Jackshaft Removal
Refer to Figure 1-5.
5. Remove gearbox. Remove 1/4-inch bolts (1), washers and
nuts (2) that hold the gearbox cover on mounting plate. Re-
move the bolts and washers (3) that hold the bearing bracket
to the mounting plate and gearbox transmission. Remove
the snap ring and miter gear (4). Lift the gearbox off the
mounting plate.
16509
Figure 1-5
Gearbox Removal