Great Plains 1006NT Operator Manual - Manual (Page 11)

-
9 9/13/04 Great Plains Mfg., Inc.
Section 2 Assembly Instructions & Set-Up
706/1006 Seed Box Agitator 118-903M
Final Drive Connection
Referring to Figure 2-4, thread the drive chains as
shown, depending on which drill set up you have.
Align the sprockets, idlers, and chain. Secure all
sprockets by setscrews and tighten all idlers to remove
excessive chain slack.
When adding an agitator to a Fertilizer or Small Seeds
Drill, the existing drive chain may need to be lengthened
to accomodate the agitator. Included in the kit for
Fertilizer or Small Seeds Drills, is additional chain, chain
connector and an offset link to increase the chain length.
Chain Installation
Figure 2-4
21832
Seed/SGS Drill w/agitator
Seed/Fertilizer or
Seed/Fertilizer/SGS
Seed Drill Agitator