Seed tube assembly, Smv sign attachment – Great Plains 3S-3000 Assembly Instructions User Manual

Page 3

Advertising

12/2/08

Small Seeds Option 133-216M

Great Plains Mfg., Inc.

Assembly

■

Seed Tube Assembly

Note: For drills without a fertilizer kit use seed tube P/N
123-939H and use the following instructions.

Refer to Figure 4

Insert the seed tube (1) into the hole on the top of the
opener. Add reinforcement ring (7) and secure in
place with a number 10-16 x 1/2” screw (2).

Slide a hose clamp (4) over the hose (3). Slide the end
of the hose over the seed tube and secure it in place
with the hose clamp.

Slide a hose clamp (4) over the other end of the hose
and slide the hose over the seed outlet which corre-
sponds with the appropriate opener. Secure hose in
place with the hose clamp. Repeat the above steps to
install the rest of the seed tubes and hoses.

Note: For drills with a fertilizer kit use seed tube P/N 133-
128H and use the following instructions.

Refer to Figure 4

Set the side delivery (5) down over the top of the open-
er directly in front of the fertilizer tube. Line up the
holes with the holes in the opener and insert the 3/8”
x 3 5/8” bolt and secure bolt with a 3/8” lock nut.

Slide a hose clamp (4) over the hose (3). Slide the end
of the hose over the seed tube and secure it in place
with the hose clamp.

SMV Sign Attachment

Refer to Figure 5

Attach SMV bracket (1) to the walkboard on the center
box using 5/16” x 3/4” bolts (2), 5/16” lock washers
and 5/16” nuts.

Note: For drills built prior to 4/10/02 it will be necessary to
drill holes in the walkboard in order to mount the bracket.
Use the bracket as a template to mark the holes then drill
two 11/32” holes.

Attach SMV sign (3) to the bracket (1) using 1/4” x 3/4”
bolts, 1/4” lock washers and 1/4” nuts.

Figure 4

Seed Tube and Hose

Figure 5

SMV Sign

20101

20103

Advertising