Great Plains P16229C Operator Manual - Manual (Page 21)

21 Hydraulic Reset Flatliner
Operating Instructions
4.6 Work Instructions
Driving speed
The Hydraulic Reset Flatliner can be driven
at speeds of up to 15 kph.
This depends on the field conditions (type
of soil, surface trash, etc.).
Drive more slowly if the conditions are
difficult.
Turning:
Before turning, the machine should
be eased out of work while driving.
Likewise, it should eased back
into work once the turn has been
completed.
Parking the Machine
In order to avoid damage as a result of
moisture, the machine should be parked, if
possible, indoors or under cover.
When manoeuvring the machine,
pay attention to your surroundings.
Ensure that nobody (children!) is
in the manoeuvring area.
• Park the machine on level and solid ground.
Lower the machine so that it is supported
on the tines.
• Unhitch the machine and disconnect the
hydraulic lines.
4.7 Checks
The working quality depends on the adjust-
ments and checks made prior to and during
work, as well as on regular servicing and
maintenance of the machine.
Before beginning work it is therefore impor-
tant to carry out any necessary servicing
and to lubricate the machine as required.
Checks prior to, and during work:
• Is the machine correctly hitched up and the
coupling device locked?
• Have the hydraulic lines (if applicable)been
connected according to the colour coding?
• Is the machine in a level operating position
and the working depth set correctly?
Working Elements
• Are the tines and other cultivation tools in
a serviceable condition?
• Are the scrapers still operable, so that the
rolls do not jam?
4. Adjustment / Operation