Great Plains P16229 Serial No 18007975 2009 - Manual (Page 19)

19 Hydraulic Reset Flatliner
Operating Instructions
4.2 Tines
The Hydraulic Reset Flatliner is fitted with with
Pro-Lift tines and points. The tines are
arranged in a ‘V‘ frame to give lower draft
requirements and the ability to work
progressively deeper. Each tine is held
hydraulically in work allowing a fast,
responsive trip and re-setting action on the
move.
Different wings are available to suit the soil
conditions and optimise the performance of
the machine.
Tine depth is achieved by moving the tines
up and down in the adjustable clamps.
Standard Wing
P09060
• Maximum soil disturbance with
minimum draft requirement under normal
circumstances.
• Wing angle reduces wear rates on leg.
Extra Lift Wing
P10392
• Increased lift height and and rake angle
creates greater soil disturbance on all soil
types especially in moister conditions.
• Lower relative distance between edge
of wing and point reduces draft requirement.
• Has ability to work at lower depths with
no decrease in soil disturbance or risk of
smear.
Extra Wide Wing
P10411
• Improved lateral shatter in moist/wet
soils, or non-cohesive soils.
• Ideal for deep vegetable applications
under light/medium soils.
4.3 Pro-Lift Wings
4. Adjustment / Operation
Wear Shroud
P11181
• Wear plate to take soil abrasion so
lower trailing edge of tine does not wear.
Fig. 4.02: Trip Reset Tine