Great Plains 1300 Fertilizer Assembly Instructions - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
175-196M
1300 13’ End Wheel Drill
1300 Fertilizer Assembly Upgrade
• 1300 13’ End Wheel Drill
General Information
These instructions explain how to install the 1300 Fer-
tilizer Assembly Upgrade. The Fertilizer Assembly
Upgrade allows conversion of a standard seed box to
fertilizer. These instructions apply to:
175-209A 1300 Fertilizer Upgrade 6
175-210A 1300 Fertilizer Upgrade 7 1/2
175-211A 1300 Fertilizer Upgrade 10
10/24/2005
Before You Start
Page 10 is a detailed listing of parts included in
the 1300 Fertilizer Assembly Upgrade. Use this
list to inventory parts received.
Tools Required
• Basic Hand Tools
Install Fertilizer
Refer to Figure 1
1. Replace gas spring (1) on all parti-
tions. Remove ball stud (2) and lock
nut (3) securing spring (1) to box lid
and spring (1) to partition. Discard
all pieces.
2. Attach new gas spring (1) provided
in kit to box lid using new ball stud (2)
and 5/16-18 lock nut (3). Complete
installation by securing spring (1) to
partition using new ball stud (2) and
5/16-18 lock nut (3).
3. Repeat steps 4 and 5 on remaining
partitions.
Refer to Figure 2
4. Install a set of inner (6) and outer (3)
divider clips on both sides of each
box partition (1). Use 5/16-18 x 1 1/4
bolts (5) and 5/16-18 hex nuts (2) to
secure clips (6 and 3) to partitions
(1). Leave bolts loose.
5. Attach a divider angle bracket (4) to
each side of each partition (1) using
5/16-18 x 1 1/4 bolts (5) and 5/16-18
hex nuts (2).
Figure 2
Box Partition
23407
Assembly Instructions
23411
Figure 1
Gas Springs
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!