Great Plains DTX350 Operator Manual - Manual (Page 30)

30 Simba DTX
604-107M-ENG
2013-01-28
Measures in case of injury
through oil
Eyes:
Should any oil be splashed into your eyes,
rinse with water for 15 minutes. If the eye is
still irritated, contact a doctor immediately
If oil is swallowed
If oil is swallowed, it is important not to induce
vomiting. Contact a doctor immediately.
Skin irritation caused by oil
In case of prolonged skin contact, wash off
the oil with soap and water.
Oil Spills
Use either sand or a suitable granular
absorbent to soak up any spilt oil. Dispose
of the oil-contaminated absorbent in the
proper manner.
Oil Fires
Never use water to extinguish an oil fire.
The oil will float on the water causing the
fire to spread.
Burning oil-lubricant must be extinguished
using a carbon dioxide powder or foam
extinguisher. Always wear respiratory
equipment when dealing with fires of this
type.
Waste Oil Disposal
Oil-contaminated waste and used oil must
be disposed of in accordance with current
legislation.
Waste oil must be collected and disposed
of in accordance with local regulations.
Never pour used oil into unsealed sewage
systems or drains or onto the ground.
5.13 Lubricants
Great Plains strongly recommend the use
of Lithium Complex EP2 Grease in the
disc hubs of your Simba DTX. This grease
is a Lithium Complex soap dispersed in a
mineral oil and is interpreted by IARC as
being non-carcinogenic. Grease cartridges
are available from Great Plains. Using this
grease in combination with the labyrinth type
seal it is permissible to lengthen the greasing
interval on the disc hubs to 200 hours. If
using a standard agricultural grease the disc
hubs should be lubricated every 50 hours.
All other lubricating points on the machine
can be lubricated with multigrade lubricating
grease as specified in DIN 51825 KP/2K -
40.
Advantages of Lithium Complex EP2
Grease
 Excellent mechanical stability.
 Excellent load carrying properties.
 Wide temperature range.
 Excellent oxidation stability.
 Excellent water resistance.
 Compatibility with other greases.
5. Servicing and Maintenance