Great Plains NTA3010 Operator Manual - Manual (Page 31)

29
Section 5 Maintenance and Lubrication
8/14/ NTA3010 and NTA3510 Air Drill Implement SN Z1370- 160-219M
Great Plains Mfg., Inc.
Coulter Pivots
Zerks are on four central grease banks–two banks on the
center frame section and one bank on each wing.
Type of Lubrication: Grease
Quantity = About five pumps per zerk.
8
Rockshaft Pivots
Pivots on each end and center of rockshaft
Type of Lubrication: Grease
Quantity = Until grease is visible at ends of pivot.
Fold Pivots
Front and back hinges on both wings
Type of Lubrication: Grease
Quantity = Until grease is visible at ends of pivot.
Coulter Hub Bearings
Type of Lubrication: Grease
Quantity = Until resistance is felt.
10
10
Seasonally
16126
16125
16124
12455