Great Plains 4000TC Predelivery Manual User Manual
Page 3
Great Plains Manufacturing, Inc.
iii
07/02/2013
586-239Q
©
Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Introduction ..................................................................4
Description of Unit ..........................................................4
Models Covered .............................................................4
Document Family ...........................................................4
Tools Required ...............................................................4
Pre-assembly Checklist..................................................4
Using This Manual..........................................................5
Definitions...................................................................5
Unload Smaller Items First .........................................6
Unload Turbo-Chopper...............................................6
Unpacking Boxes .......................................................6
Assembly and Setup Assistance ................................7
Assembly ......................................................................8
Hitch Assembly...........................................................8
Wing Assembly...........................................................8
4000 Outer Wing Assembly........................................9
Hitch Hose & Light Harness Assembly.......................9
3000 Hydraulic Wing Lift Assembly..............................10
4000 Hydraulic Wing Lift & Fold Assembly ..................12
Attach Hose Clamps and Hose wraps......................14
Hydraulic Hose Hookup............................................14
Hose Handles ...........................................................14
Purging Hydraulic System ........................................15
Light Bracket and SMV Assembly ................................16
Rolling Harrow (optional) ..........................................18
Reel Following Rolling Harrow (optional) .................19
Detracker Assembly (Optional) ....................................20
Detracker Placement ................................................20
Install Rear Hitch (optional) ..........................................21
Extended Rear Hitch ................................................21
A-Frame Hitch ..........................................................21
Rear Stand ...............................................................22
Appendix - Reference Information............................23
Torque Values Chart .................................................... 23
Tire Inflation & Warranty .............................................. 24
Hydraulic Connectors and Torque ............................... 25
1200TC & 1500TC Hydraulic Lift Layout ..................... 27
1800TC Hydraulic Lift Layout....................................... 28
1800TC Hydraulic Fold Layout .................................... 29
2400TC Hydraulic Lift Layout....................................... 30
2400TC Hydraulic Fold Layout .................................... 31
3000TC Hydraulic Lift Layout....................................... 32
3000TC Hydraulic Fold Layout .................................... 33
4000TC Hydraulic Lift Layout....................................... 34
4000TC Hydraulic Fold Layout .................................... 35
1200TC Machine Layout .............................................. 36
1500TC Machine Layout .............................................. 37
1800TC Machine Layout .............................................. 38
2400TC Machine Layout .............................................. 39
3000TC Machine Layout .............................................. 40
4000TC Machine Layout .............................................. 42
4000TC Machine Layout .............................................. 43
1200TC Rolling Harrow Layout .................................... 44
1200TC Heavy Reel Following Rolling Harrow Layout 45
1500TC Rolling Harrow Layout .................................... 46
1500TC Heavy Reel Following Rolling Harrow Layout 47
1800TC Rolling Harrow Layout .................................... 48
1800TC Heavy Reel Following Rolling Harrow Layout 49
2400TC Rolling Harrow Layout .................................... 50
2400TC Heavy Reel Following Rolling Harrow Layout 51
3000TC Rolling Harrow Layout .................................... 52
3000TC Rolling Harrow Layout .................................... 53
3000TC Heavy Reel Following Rolling Harrow Layout 54
3000TC Heavy Reel Following Rolling Harrow Layout 55
4000TC Rolling Harrow Layout .................................... 56
4000TC Rolling Harrow Layout .................................... 57
4000TC Heavy Reel Following Rolling Harrow Layout 58
4000TC Heavy Reel Following Rolling Harrow Layout 59
Index........................................................................... 61