Great Plains Yield-Pro 1625 Planter 2004 User Manual
Page 3
12/12/2005
402-188M
Great Plains Mfg., Inc.
3
Installation Instructions
Refer to Figure 3
1.
Remove cotter pin and cylinder pin securing hy-
draulic cylinder to eyebolt weldment. Discard cyl-
inder pin.
2.
Remove cotter pin and cylinder pin securing op-
posite end of hydraulic cylinder to lower swivel
caster weldment. Discard cylinder pin.
3.
Reattach cylinder to eyebolt weldment and lower
swivel caster using new cylinder pins provided in
kit. Secure cylinder pins with cotter pins previous-
ly removed.
NOTE: When installing new cylinder pins to reat-
tach cylinders, note location of grease outlet
holes in center of pins. Install pins so that holes
are pointing upwards or towards the cylinder
main body.
4.
Repeat steps 1-3 on opposite side of planter.
5.
Remove blocks supporting planter.
Figure 3
Install Anti-Rotating Pins
24004