Canon elura20 - Manual (Page 103)

103
E
Using a Memory Card (ELURA20 MC only)
2
Card Jump Function
You can jump from the current image to the desired image of unadjacent image
number without displaying the images one by one.
The numbers shown in the upper right in CARD PLAY mode indicate the image
number of the current still image / total number of still images on the memory card.
With an image in the display, press and hold the CARD +/– button.
• Press the + button to jump through the images forwards and press the – button
to jump backwards.
• The image number moves forwards or backwards.
• When you release the button, the still image, to which the currently shown
number is assigned, appears in the display.
2
Slide Show
With an image in the display, press the SLIDE SHOW button.
• The images play back one after another.
To stop the slide show, press the SLIDE SHOW button.
• The slide show starts or stops each time you press the SLIDE SHOW button.
2
Index Screen
Up to 6 images appear at once so you can search quickly for an image.
1. With an image in the display, press the INDEX SCREEN button.
• Up to 6 images appear in the display.
2. Move the mark to the image you want to view.
• Turn the SELECT dial downwards to go to the previous image and upwards
to go to the next image.
• Turning the dial upwards at the last image will take you to the next index
screen. Turning the dial downwards at the first image will take you to the
previous index screen.
• Jump to the next/previous index screen with the CARD +/– buttons.
3. Press the INDEX SCREEN button.
• The image you have marked fills the whole display.
CARD
PLAY
INDEX 101–0143
43/50
SEL. INDEXEND
CARD
PLAY
CARD
PLAY