Canon elura20 - Manual (Page 16)

16
E
Mastering
the Basics
Basic Recording
Have you completed the following steps?
• Attached a power source (
11).
• Removed the lens cap ( 121).
• Chosen the display: viewfinder ( 121) or LCD screen ( 22)
• Extended the viewfinder ( 121) /adjusted the LCD screen ( 22)
• When you’re using the viewfinder, fully close the LCD or rotate the LCD so
that it faces the same direction as the lens ( 24).
You may also want to install the backup battery ( 124) in order to set the date
and time display ( 46).
3
1
4, 5
P
OFF
POW
ER
VCR
P.SC
AN
MOVIE
Before you start recording
To record
1. Press the button next to the POWER dial and hold, turn the
POWER dial to MOVIE.
• The camera automatically sets to record pause mode. PAUSE appears in the
display.
• The camera power indicator lights up red.
• The confirmation beep sounds.
• The camera will turn itself off if you leave it in record pause mode for more
than about 5 minutes. To return to record pause mode, turn the POWER dial
to OFF and then back to MOVIE.
• For Progressive Scan recording, see p. 49.
ELURA20 MC only: For still image recording to a memory card, see p. 94.
2. Load a cassette ( 14).