Great Plains 2510HDF Parts Manua - Manual (Page 2)

2 Great Plains Manufacturing, Inc. Side Shift Hitch Option
117-197M 05/24/2010
20ft and 25ft Side Shift Hitch Options
3-Point Hitching
Refer to Figure 2 and Figure 3
The left and right arms of the tractor 3-point hitch are
secured and prevented from shifting laterally.
The objective is to offset the drill center-line with the trac-
tor center-line.
1. This kit includes several spacers to position and
secure the left and right arms of the 3-point hitch:
401-630H SPACER 3 PT 1 1/2 X 2
411-442D LOWER 3PT PIN SPACER 1/2 THK
411-448D LOWER 3PT PIN SPACER 1/4 THK
411-449D TUBE 3" X 1 1/2" X 1/2" LONG
2. The tube spacers ( and ) are always used, and
are typically positioned on the right and left of the
tractor hitch arm.
3. Insert open-end spacers ( and ) to the left of
the smaller tube spacer to achieve center-line
alignment.
4. Add a combination of the remaining spacers to elimi-
nate any slack space on the pin, and minimize side-
to-side play during operations.
5. Secure both sets of spacers with the provided
1 ⁄
2
-13
bolts, lock washers and nuts.
Figure 2
20ft Side Shift Hitch Bundle
31120
U
D
F
B
L
R
21
22
20
19
Crushing Hazard:
Do not stand or place any body part between
drill and moving tractor. You may be severely
injured or killed by being crushed between
the tractor and drill. Stop tractor engine and
set parking brake before attaching cables and hoses.
19
20
21
22
Figure 3
25ft Side Shift Hitch Bundle
31121
U
D
F
B
L
R
19
22
21
20
19 22
20 21
22