Great Plains NH3 Safety User Manual
Page 22
18
NH
3
Safety
Great Plains Manufacturing, Inc.
407-551M
2013-07-15
Refer to Figure 15 (some components shown exploded for
clarity - never remove any except the outlet cap).
A71 Liquid Level Float Gauge:
Check this gauge when accepting a tank. It needs
to be in sound mechanical condition, legible, and
reading no higher than 85.
This gauge has a mechanical float that is coupled to
the indicator needle. Float gauges typically report
0-100 percent of fill.
Float gauges are typically mounted at tank top,
facing up, but may also be installed at 45
°, with face
tilted up, or horizontal, with face to front or side.
On a leased tank, learn the reading to expect when
the tank level reaches minimum-usable. It may be
an indication above, at, or even below zero.
The gauge reading may be inaccurate if the tank is
on a slope, or has just been moved (due to
sloshing).
Figure 15
Float Gauge
31574
NH
3
GAS
NH
3
LIQUID
A71