Great Plains P14889 Serial No 18007975 - Manual (Page 17)

17 Simba SL
Operating Instructions
2.5 Folding and Unfolding
2.5.1 Unfolding into the Work
Position
1 Fully raise the machine on the rear
(transport) axle and the front linkage.
2 Draw the wings in to remove load from
the wing lock (transport catch). The wing
lock will automatically disengage before
unfolding.
3 Unfold the wings and continue to
pressure down to ensure they will hold
in work.
2. Transportation / Installation
2.5.2 Folding into the
Transport Position
1 Fully raise the machine on the rear
(transport) axle and the front linkage.
2 Fold the machine ensuring the
automatic transport lock engages.
3 Shut the taps on the axle cylinder to
secure it for transport.
A lower transport height can be
achieved by using shims in the axle
cylinder if desired.
4 The machine is now ready for road
transport.
Road transport speed should not
exceed 25kmh (16mph) .
Fig. 2.02: Automatic Wing Lock