Great Plains 3N-4020 Assembly Instructions - Manual

© Copyright 2003 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
21887
113-777M
No-Till Precision Seeding System and No-Till Drill
Flat Fold Marker Option
• 3N-4010P
• 3N-4015P
• 3N-4020P
• 3N-4025P
• 3N-4010
• 3N-4020
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the
Flat Fold Marker. The hydraulically operated,
flat-fold markers leave a line for you to follow
on the next field pass. Markers are sold as sin-
gle units for mounting on the left end of your
drill or as dual units for mounting on both ends
of your drill. Dual markers are plumbed togeth-
er with a sequence valve so you can operate
both markers on the same hydraulic circuit.
These instructions apply to:
113-769A 40P Dual No-Till Marker
113-770A 40P LH No-Till Marker
Manual Update
Refer to the No-Till Precision Seeding System
operator’s manual for detailed information on
safely operating, adjusting, troubleshooting
and maintaining the Flat Fold Marker.
2/28/2006
Refer to the parts manual for part identification.
196-286M Operator’s Manual
196-286P Parts Manual
196-359M Operator’s Manual
196-359P Parts Manual
Before You Start
Pages 10 through 14 are a detailed listing of parts
included in the Flat Fold Marker package. Use
these lists to inventory parts received.
Tools Required
• Basic hand tools
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the drill will
travel while in use.