Great Plains 3S-4000 Assembly Instructions - Manual

© Copyright 2006 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
194-544M
3S-4000 Three-Section Folding Drill
Hydraulic Fold Cylinder Hold Kit
• 3S-4000
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life
and the lives of others depend on it!
!!
These instructions explain how to install the Hydraulic
Fold Cylinder Hold Kit. This kit is used to prevent fold-
ing cylinders from compressing when implement is
being used on an extreme incline. Compressed fold-
ing cylinders will cause the frame to fold inward and
may cause personal injury or machine damage.These
instructions apply to:
194-543A Hydraulic Fold Cylinder Hold Kit
7/24/2006
Before You Start
Page 4 is a detailed listing of parts included in the
Hydraulic Fold Cylinder Hold Kit. Use this list to in-
ventory parts received.
Tools Required
• Basic Hand Tools
Assembly Instructions
NOTE: Instructions 1 through 4 provide preas-
sembly details for PO check valve.
Refer to Figure 1
1.
Install 9/16" FJIC adapter (1) into port 1 of PO
check valve (5). NOTE: Port numbers will
be stamped on valve body for easy refer-
ence.
2. Insert 9/16" MJIC adapter (4) into port 2 of
PO check valve (5).
3. Attach 9/16" FJIC elbow fitting (2) to 9/16"
FJIC adapter (1) located in port 1.
4. Install 9/16" MJIC elbow fitting (3) into port 3
of PO check valve (5).
25007
Figure 1
PO Check Valve