Great Plains 6548 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 15)

Revision Comments Part Description Part No. Ref.
Image No. dwg00358
Model 6537, 6539, 6541 & 6544 INSIDE WING ASSY 9'WING RH 560-049H 1.
Model 6537, 6539, 6541 & 6544 INSIDE WING ASSY 9'WING LH 560-050H 1.
Model 6546 & 6548 INSIDE WING ASSY 10' WING RH 560-051H 1.
Model 6546 & 6548 (shown) INSIDE WING ASSY 10' WING LH 560-052H 1.
Model 6537, 6539, 6541 & 6544 9' WING BRACE 560-053H 2.
Model 6546 & 6548 (shown) 10' WING BRACE 560-054H 2.
Model 6537, 6539, 6541 & 6544 WHEEL BRACKET RH 575-687H 3.
Model 6537, 6539, 6541 & 6544 WHEEL BRACKET LH 575-688H 3.
Model 6546 & 6548 WING WHEEL BRKT RH 560-117H 3.
Model 6546 & 6548 WING WHEEL BRKT LH 560-118H 3.
Rev. 2 Model 6537, 6539, 6541 & 6544 FOLD BRACKET FRONT 100 560-278H 4.
Rev. 1 REP BY 560-278H 575-682H 4.
Rev. 2 Model 6546 & 6548 (shown) FOLD BRACKET FRONT 114 560-281H 4.
Rev. 1 REP BY 560-281H 575-681H 4.
Rev. 2 Model 6537, 6539, 6541 & 6544 FOLD BRACKET REAR 100 560-280H 5.
Rev. 1 REP BY 560-280H 570-198H 5.
Rev. 2 Model 6546 & 6548 FOLD BRACKET REAR 114 560-283H 5.
Rev. 1 REP BY 560-283H 560-062H 5.
180 DEGREE FOLD BRACKET-INSIDE 560-016H 6.
7" OFF SET STUB 560-044H 7.
PIN HINGE 1 1/4X6 HRDN PLT 805-378C 8.
Rev. 2 HHCS 3/8-16X2 1/4 GR8 SP THD 802-623C 9.
Rev. 1 Changed to 802-623C HHCS 3/8-16X2 1/2 GR5 802-114C 9.
Rev. 2 NUT HEX TOP LOCK 3/8-16 PLT 803-123C 10.
Rev. 1 Changed to 803-123C NUT LOCK 3/8-16 NYLON INSERT 803-078C 10.
HHCS 1-8X6 GR5 802-357C 11.
NUT HEX 1-8 NYLON INSERT PLT 803-038C 12.
ROCKER 6 1/2 580-010D 13.
PIN CLEVIS 1 X 3 3/8 USABLE 805-351C 14.
WASHER MACH 1.5X1.00X.075 804-192C 15.
PIN COTTER 3/16 X 2 805-058C 16.
HHCS 3/4-10X2 1/2 GR5 802-212C 17.
WASHER LOCK SPRING 3/4 PLT 804-023C 18.
NUT HEX 3/4-10 PLT 803-027C 19.
HHCS 3/4-10X2 GR5 802-064C 20.
HHCS 3/4-10X5 GR5 802-069C 21.
U-BOLT 5/8-11X4 1/32X4 1/4 806-179C 22.
WASHER LOCK SPRING 5/8 PLT 804-022C 23.
NUT HEX 5/8-11 PLT 803-021C 24.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2 806-079C 25.
5" BOLT-ON STUB 560-019H 26.
HHCS 5/8-11X1 1/2 GR5 802-051C 27.
Model 6541 - 6548 STUB, 23 1/2 BOLT-ON" 560-012H 28.
U-BOLT 1/2-13X3 1/32X5 806-189C 29.
WASHER LOCK SPRING 1/2 PLT 804-015C 30.
NUT HEX 1/2-13 PLT 803-020C 31.
WING LOCK MOUNT 560-010H 32.
AUTOMATIC WING LATCH 560-013H 33.
HHCS 3/4-10X4 1/2 GR5 802-192C 34.
WASHER FLAT 3/4 USS PLT 804-024C 35.
NUT LOCK 3/4-10 PLT 803-026C 36.
GREASE ZERK 1/4-28 THD FORMING 800-080C 37.
BUSHING CYL 1 1/4 X 1 X 1 890-005C 38.
Rev. 2 HHCS 5/8-11X/2 GR5 802-055C 39.
Rev. 1 Changed to 802-055C HHCS 5/8-11X1 1/2 GR5 802-051C 39.
11/11/08 - 15 - 560-203P
Table of Contents Part Number Index
Section 2: Frames
6537-6548 Inside Wing Assembly
(Applies to 6537FC R H, 6539FC R H, 6541FC R H, 6544FC R H, 6546FC R H, 6548FC R H only)