Great Plains 1005NG - Manual (Page 2)

Great Plains Mfg., Inc.
2 Hex Shaft Update Kits
202-612M 02/29/2008
Old Component Removal
Dismount Chain
Refer to Figure 2
3. On both ends of the Native Grass seed box, flip out
the snap fasteners
. Lift the access panels up
and out, and save them.
Refer to Figure 3
4. Loosen the idlers .
5. Remove the chain from the drive sprocket
and let it hang toward the idlers.
Remove Old Sprocket
Refer to Figure 3
6. Remove and save the:
PIN LINCH 1/4 X 1 3/4 PLT
7. Remove the:
24T SPEED CHANGE SPROCKET
It is not re-used.
Loosen Shaft Components
Loosen Agitator Set Screws
Refer to Figure 4
8. At each Native Grass seed cup row, loosen or
remove one or two:
SCREW SET SQ HD 3/8-16 X 3/4CP
from each:
AGITATOR WELDMENT 7,7 1/2 & 8
or
ROD AGITATOR
The set screws are not re-used.
Figure 2
Remove Access Panels
26284
1
U
D
F
B
L
R
1
1
2 53
Figure 3
Dismount Chain
18113
1
2
53
60
60
53
Figure 4
Loosen Old Agitators
26285
56
56
55
54
U
D
L
R
B
F
56
54
55