Great Plains DICKEY-john IntelliAg Planter-Drill Control L1 - Manual (Page 19)

OPERATOR’S MANUAL
IntelliAg PDC User Level 1 (GP)
11001-1508-200903
SYS INFOR AND DIAGNOSTICS / 17
ACKNOWLEDGING ALARM CONDITIONS
Various alarm conditions may be presented whenever the system
encounters an abnormal condition or detects a specific alarm. Alarms are
typically in a full screen display describing the alarm and, dependent upon
the alarm type, may give instructions on how to fix the alarm. Each alarm
type has an associated alarm number which can be cross-referenced in the
Troubleshooting and Alarms section.
Some alarms (such as the Master Switch alarm) require a specific action
before the alarm condition will cease. In these cases, instructions are
indicated on the alarm display.
Other alarms can be acknowledged by pressing the Alarm Cancel button
of ESC key.
Alarm details can only be cleared by a Level 2 or Level 3 User.
ALARM LOG
The Alarm Log screen provides a list of specific alarms that have been
issued during system operation. Information displayed on the Alarm Log
screen is informational only and cannot be edited.
Each time specific alarm conditions are detected it is logged and
communicated to the WSMT.
To View Alarm Log:
1. Press the Alarm Log button to access the Alarm Log screen.
– The number of the alarm, along with the alarm description displays.
– Up to 20 alarms can be recalled.
– Each alarm occurrence can have up to 5 instances of the alarm
tagged with a date and time stamp.
2. To select specific alarm details, press the Previous or Next buttons to
move the small display arrow next to the desired alarm number.
3. Press the Alarm Detail button to view all of the occurrences of the
selected alarm.
– The down arrow in the lower left at screen bottom signifies that
more alarms are present and accessible by pressing the Previous
or Next buttons.