Great Plains 24F Assembly Instructions - Manual

© Copyright 2006 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
118-073M
20P, 24P, 25P 3-Point Precision Drills
Weight Bracket Kit
• 20P 3-Point Precision Seeding System
• 24P 3-Point Precision Seeding System
• 25P 3-Point Precision Seeding System
• 20F 3-Point Drill
• 24F 3-Point Drill
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life
and the lives of others depend on it!
!!
These instructions explain how to install the Weight
Bracket Kit. This optional kit is used to add weight to
the drill frame.These instructions apply to:
118-071A 20P/24P/25P Weight Bracket Kit
118-072A 20F and 24F Weight Bracket Kit
4/5/2006
Before You Start
Page 5 is a detailed listing of parts included in the
Weight Bracket Kit. Use this list to inventory parts
received.
Tools Required
• Basic Hand Tools
20F and 24F 3-Point Drills
Assembly Instructions for 118-071A
Refer to Figure 1
1. Attach weight bracket adjustment leg (2) to
weight bracket weldment (1).
2. Secure adjustment leg (2) to weldment (1) us-
ing two 5/8-11 x 2 1/4 bolts (3), 5/8 flat washers
(4), 5/8 lock washers (5), and 5/8-11 hex nuts
(6). Leave bolts loosened for adjustment.
3. Complete steps one and two for both weight
brackets.
Figure 1
Weight Bracket and Adjustment Leg
24443