Great Plains 2SF30 Parts Manual - Manual (Page 51)

Revision Comments Part Description Part No. Ref.
Image No. dwg16769
VANSCO 2 CHANNEL SHAFT MONITOR 823-059C 1.
VANSCO 3 CHANNEL SHAFT MONITOR 823-060C 1.
VANSCO 2 CHNL SHAFT MNTR-2SNT 823-076C 1.
VANSCO CONTROL BOX ASSY 2 CH 253001 2.
VANSCO CONTROL BOX ASSY 3CH 253000 2.
VANSCO HARNESS 2 CH 40FT 253701 3.
VANSCO HARNESS 3 CH 60FT 253700 3.
2nd rev. REED SWITCH PICK-UP VA-080002 4.
Use existing stock; 1st rev. REPLACED BY VA-080002 080002 4.
WASHER FLAT #8 PLT 804-088C 5.
WASHER LOCK #8 804-043C 6.
NUT HEX 8-32 803-064C 7.
2nd rev. VANSCO SWITCH BRACKET 116-181D 8.
Use existing stock; 1st rev. RPBY 116-181D 116-169D 8.
SCREW RD HD 8-32 X 1 1/2LG PLT 801-067C 9.
SCREW RD HD 8-32 X 1/2 LG PLT 801-016C 10.
2nd rev. VANSCO MAGNET & CABLE TIE ASSY 116-132K 11.
Use existing stock; 1st rev. RPBY 116-132K 116-119K 11.
VANSCO MAGNET 890-321C 12.
CABLE TIE .19X7.25 1.75D 50LB 800-112C 13.
Service part for 823-060C. MOUNTING BRACKET VA-VMM253501 14.
Service part for 823-060C. VANSCO MOUNTING KNOB KIT VA-253307 15.
Service part for 823-060C. BRYLITE CONSOLE END VA-JX-B77 16.
Service part for 823-060C. BRYLITE HARNESS END VA-JX-B76 17.
11/05/13 - 51 - 155-015P
Table of Contents Part Number Index
Metering System
Vansco Shaft Monitor (Option)
(Applies to 2SF24 (1986+), 2SF30 (1986+) only)