Assemble the right & left hand tool bar brace (#1), Hitch with the 3/4" x 2" long bolts (#2), Washers (#3), and the 3/4" hex nuts (#4) – Great Plains 20’ CPH Operator Manual User Manual
Page 7: 5) is designed to be turned two different di, Support weldment (#5), Fasten the tool bar support weldments (#5) to the, 6), 5/8" lock washer (#7), 8). do not tighten bolts yet
Advertising
-
5
3/31/04
Great Plains Mfg., Inc.
1994 20’ CPH Coulter Tool Bar Brace Assembly 149-721M
Ref.
Part No.
Part Description
Section 4 Coulter Tool Bar Brace Assembly
1.
149-166H
20’ CPH Tool Bar Brace - Left Hand
149-167H
20’ CPH Tool Bar Brace - Right Hand
2.
802-064C
Screw, Cap Hex Head 3/4"-10 x 2" Long
3.
804-023C
Washer, Lock Spring 3/4"
4.
803-027C
Nut, Hex 3/4"-10
5.
149-165H
20’ Tool Bar Support
6.
806-063C
U-Bolt 5/8"-11 x 4 1/32" x 7" Long
7.
804-022C
Washer, Lock Spring 5/8"
8.
803-021C
Nut, Hex 5/8"-11
9.
804-030C
Washer, Lock Spring 1 1/4"
10.
802-123C
Screw, Cap Hex Head 1 1/4"-7 x 2 1/2" Long
11.
149-586D
CPH Brace Kit Spacer
Advertising