Great Plains LC40 Parts Manual - Manual (Page 9)

Revision Comments Part Description Part No. Ref.
Image No. dwg34908
BEDDER STACKING WING FRAME WLD 591-008H 1.
UPPER ARM LIFT LINK WLDMT 591-004H 2.
FLEX LINK WELDMENT 591-003H 3.
STACK FOLD EXTENSION LINK WLD 591-009H 4.
LUG WELDMENT 401-398H 5.
LINK UPPER LIFT ARM WLDMT 401-314H 6.
NUT HEX 1 1/2-6 PLT 803-073C 7.
PIN 1 1/2 X 10.75 401-868D 8.
PIN 1 1/4 X 11 1/4 W/HOLE 401-867D 9.
PIN 2 1/4 X 19 5/8 W/HOLE 591-058D 10.
PIN ROLL 3/8 X 2 1/2 PLT 805-255C 11.
PIN LINCH 5/16 X 2 11/32 805-158C 12.
HHCS 1/2-13X3 3/4 GR5 802-042C 13.
NUT LOCK 1/2-13 PLT 803-019C 14.
HHCS 3/8-16X2 1/2 GR5 802-114C 15.
NUT LOCK 3/8-16 NYLON INSERT 803-078C 16.
PIN CLVS 1.25X3.38 USBL GR5 805-196C 17.
PIN COTTER 3/16 X 2 1/4 PLT 805-094C 18.
WASHER FLAT 1 1/4 SAE PLT 804-039C 19.
BUSHING SPINDLE 1 1/2X1 1/4X1 890-011C 20.
HHCS 3/8-16X1 1/4 GR5 802-079C 21.
ADJUSTMENT RETAINING CLIP 591-148D 22.
WASHER LOCK SPRING 3/8 PLT 804-013C 23.
NUT HEX 3/8-16 PLT 803-014C 24.
07/25/13 - 9 - 591-049P
Table of Contents Part Number Index
Frame
Wings
(Applies to LC40 only)