Great Plains SS0300 Operator Manual - Manual (Page 18)

14 SS0300 Table of Contents Index Great Plains Manufacturing, Inc.
596-224M Table of Contents Index 09/19/2011
Hitching Tractor to Sub-Soiler
Crushing Hazard:
Do not stand or place any part of your body between sub-
soiler and moving tractor. You may be severely injured or
killed by being crushed between the tractor and sub-soiler.
Stop tractor engine and set parking brake before attaching
cables and hoses.
High Pressure Fluid Hazard:
Relieve pressure before disconnecting hydraulic lines. Use a
piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems. Escaping fluid under
pressure can have sufficient pressure to penetrate the skin caus-
ing serious injury. If an accident occurs, seek immediate medi-
cal assistance from a physician familiar with this type of injury.
Hitching with 3-Point
1. The sub-soiler is designed to use either Category II
or III tractors.
Refer to Figure 4
2.
See drawing for correct pins and hole positions for
Category II.
Refer to Figure 5
3.
See drawing for correct pins and hole positions for
Category III
4. Connect your tractor 3-point to the sub-soiler 3-point
hitch. If using quick hitch be sure sub-soiler locks into
hitch securely.
Figure 4
Cat II Hitching
41940
Figure 5
Cat III Hitching
41939