Great Plains 6328 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 19)

Revision Comments Part Description Part No. Ref.
Image No. dwg00280
Pivot Spindle, 2 x 8 1/16 550-015D 1.
Seal, (CR16286) 816-398C 2.
Inner Cone, (JL69349) 822-198C 3.
Inner Cup, (JL69310) 822-197C 4.
Heavy Beam 560-035H 5.
Rev. 2 Grease Zerk, 1/4-28 Thread Forming 800-080C 6.
Rev. 1 Changed to 800-080C Grease Zerk, 1/4 Straight 800-001C 6.
Outer Cup, (LM67010) 822-020C 7.
Outer Cone, (LM67048) 822-021C 8.
Washer, Spindle 7/8 804-055C 9.
Cotter Pin, 5/32 x 1 1/2 805-089C 10.
Slotted Hex Nut, 7/8-14 803-029C 11.
Dust Cap 890-781C 12.
Rev. 2 Purchased Complete Hub 6-Bolt Spindle 2X15.5 888 815-217C 13.
Rev. 1 See Hub & Spindle Assembly Replaced by 815-217C 560-135S 13.
Clevis Pin, 5/16 x 3 w/cotter 805-324C 14.
Cotter Pin, 1/8 x 1 805-363C 15.
Includes items 1 thru 15 Walking Beam Assembly 560-136L 16.
Rim, 15 x 6, 6-Bolt 814-220C 17.
Tire, 9.5L x 15, 8 ply 814-011C 18.
Includes items 17 & 18 Tire/Wheel Assembly, 9.5L x 15, 8 ply 814-230C 19.
Lug Bolt, 1/2-20 x 1 1/4, Gr.5 802-632C 20.
01/16/09 - 19 - 560-204P
Table of Contents Part Number Index
Section 3: Transport
Center Walking Beam Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)