Great Plains 7552 Series VII Parts Manual - Manual (Page 9)

Revision Comments Part Description Part No. Ref.
Image No. 00446 dwg
Models 6326, 6328, 6536, 6542
(shown)
CENTER FRAME 6536DV-6542DV 550-082H 1.
Rev. 2 Models 7333 (S/N 1227DD+) CENTER FRAME 7333DV 550-222H 1.
Rev. 1 Models 7333 (S/N 1226DD-), 7336 CENTER FRAME 550-083H 1.
Models 7348, 7352 CENTER FRAME 7548DV 7552DV 550-085H 1.
Models 6326, 6328 TORQUE TUBE 6326DV-6328DV VII 550-190H 2.
Models 6536, 6542 (shown) TORQUE TUBE 6536DV-6542DV VII 550-196H 2.
Rev. 2 Models 7333 (S/N 1227DD+) CENTER TORQUE TUBE 7333DV 550-038H 2.
Rev. 1 Models 7333 (S/N 1226DD-), 7336 TORQUE TUBE 7333DV-7336DV VII 550-191H 2.
Models 7548, 7552 TORQUE TUBE 7548DV-7552DV VII 550-103H 2.
Models 6326D, 6328D CENTER BRACE BAR 551-173H 3.
Models 6326C, 6328C CENTER BRACE BAR-COULTER 551-179H 3.
Models 6536D, 6542D (shown) CENTER BRACE BAR 551-174H 3.
Models 6536C, 6542C CENTER BRACE BAR (COULTER) 551-178H 3.
Rev. 2 Models 7333D (S/N 1227DD+) CENTER BRACE BAR (D) 7333DV 551-225H 3.
Rev. 1 Models 7333D (S/N 1226DD-), 7336D BRACE BAR 7333-36DV DISC 551-428H 3.
Rev. 2 Models 7333C (S/N 1227DD+) CENTER BRACE BAR (C) 7333DV 551-224H 3.
Rev. 1 Models 7333C (S/N 1226DD-), 7336C BRACE BAR 7333-36DV COULTER 551-430H 3.
Models 7548D, 7552D BRACE BAR 7548-52DV DISC 551-434H 3.
Models 7548C, 7552C BRACE BAR 7548-52DV COULTER 551-437H 3.
Models 6326, 6328, 6536, 6542 CENTER FOLD BRACKET 560-014H 4.
Models 7333, 7336, 7548, 7552 CENTER FOLD BRACKET 560-021H 4.
Models 6326, 6328 WING STOP, CENTER 550-069H 5.
Models 6536, 6542 (shown) CENTER WING STOP 550-105H 5.
Models 7333, 7336 WING STOP 550-067H 5.
Models 7548, 7552 CENTER WING STOP-REAR 550-107H 5.
Models 7548, 7552 CENTER WING STOP - FRONT 550-106H 6.
CYLINDER REST PAD, 3 1/2 560-015H 7.
Models 6326, 6328, 6536, 6542
(shown)
4 X 4 K-FLEX STUB 560-023H 8.
Models 7333, 7336, 7548, 7552 STUB, 5" x 4"K-FLEX 550-117H 8.
PIN HINGE 1 1/4X6 HRDN PLT 805-378C 9.
Center on 6326, 6328, 6536, 6542 PIN HINGE 1 1/4X7 HRDN PLT 805-349C 10.
Rev. 2 HHCS 3/8-16X2 1/4 GR8 SP THD 802-623C 11.
Rev. 1 Changed to 802-623C HHCS 3/8-16X2 1/2 GR5 802-114C 11.
Rev. 2 NUT HEX TOP LOCK 3/8-16 PLT 803-123C 12.
Rev. 1 Changed to 803-123C NUT LOCK 3/8-16 NYLON INSERT 803-078C 12.
HHCS 3/4-10X2 1/2 GR5 802-212C 13.
WASHER LOCK SPRING 3/4 PLT 804-023C 14.
NUT HEX 3/4-10 PLT 803-027C 15.
HHCS 3/4-10X2 GR5 802-064C 16.
U-BOLT 5/8-11X3 1/32X4 1/2 SPT 806-183C 17.
WASHER LOCK SPRING 5/8 PLT 804-022C 18.
NUT HEX 5/8-11 PLT 803-021C 19.
U-BOLT 1/2-13X3 1/32X5 806-189C 20.
WASHER LOCK SPRING 1/2 PLT 804-015C 21.
NUT HEX 1/2-13 PLT 803-020C 22.
Models 6326, 6328, 6536, 6542 HHCS 1/2-13X5 1/2 GR5 802-046C 23.
Models 7333, 7336, 7548, 7552 HHCS 1/2-13X6 1/2 GR5 802-323C 23.
PIN HITCH 1/2X4 1/2 W/KEEPER 805-379C 24.
Used on all open end 4x3 tubes PLASTIC END CAP - 4X3X1/4 TUBE 817-585C 25.
1 1/4 X 1 X 3/4 HDR BUSHING 890-143C 26.
06/11/13 - 9 - 550-221P
Table of Contents Part Number Index
Section 2: Frames
Center Frame Assembly (S/N 1328DD-)
(Applies to 6326DV, 6328DV, 6536DV, 6542DV, 7333DV, 7336DV, 7548DV, 7552DV only)