Great Plains Ground Drive Fertilizer Pump Yield Pro Planters User Manual

General information, Before you start, Yield pro planters

Advertising
background image

Great Plains Mfg., Inc.

Installation Instructions

1

©Copyright 2006

Printed 04/23/2007

407-149M

Ground Drive Fertilizer Pump

Yield Pro Planters

Used with:

2006- Yield Pro

® 1225/1625

General Information

These instructions explain how to install the Ground
Drive Fertilizer Pump enhancement kit on a planter
which already has a fertilizer pump coupled to the meter
drive system. Installing this kit eliminates the need to
adjust the pump whenever seed rates are changed.

This kit is not needed for 2007+ planters, as their
optional fertilizer systems already include these compo-
nents. This kit requires a pre-existing fertilizer system,
and re-uses many existing system components.

These instructions apply to:

Before You Start

Each kit converts an entire planter. Inventory the con-
tents per “New Parts: Kit 407-148A” on page 7.

Review these instructions, and make sure you under-
stand which existing system components are re-used,
and where they are located. The new components, and
the existing components to be re-used or discarded, are
located on the back of the left wing of the planter, about
halfway out on the toolbar.

Tools Required

• pipe sealant such as RECTORSEAL® NO. 21

• basic hand tools

• a second or third person for Step 28

Notations and Conventions

“Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Left, Right,
Front, Back, Up, Down.

Planter

Model

Kit

Kit Description

YP1225 407-148A

YP GROUND DRIVE FERT

PUMP KIT

YP1625 407-148A

YP GROUND DRIVE FERT

PUMP KIT

When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!

!

U

D

L

R

B

F

Figure 1

New Ground Drive Assembly

25302

callouts identify components in the currently
referenced Figure or Figures.

to

callouts reference new parts from the list on
page 7. The descriptions match those on the
cartons, bags or item tags, as well as your
updated Parts Manual.

to

callouts reference affected existing parts from
the table on page 9. The descriptions match
those in your Parts Manual.

U

D

L

R

B

F

1

11

27

51

71

Advertising