Great Plains 1006 Assembly Instructions - Manual (Page 2)

116-280M 5/5/2006
Great Plains Mfg., Inc.
Harrow Option 2
Setting the Angle
Refer to Figure 2
1. Adjust the angle of the tines to match your needs.
Start by loosening the 1/2" x 1 3/8" x 2 3/4" round
bottom U-bolts (1 and 2) which hold the tine tubes
to the frame and frame to the harrow arms.
2. Rotate the tubes (3) so the tine bolts (4) are
against the tines (5) and the tines are at the de-
sired angle and tighten the tine bar U-bolts (2).
3. Rotate the frame assembly to the desired angle
and tighten the U-bolts (1) which connect the
frame assembly to the arms.
NOTE: Figure 2 shows one harrow setting that has
proven successful in no till and minimum till condi-
tions. Your field conditions may differ because of mois-
ture, soil types and levels of trash. Some adjustment
of the tine tubes and/or harrow frames may be re-
quired.
Figure 2
Suggested Spring Angles
(Arrow shows direction of travel)
116-278A 706 Harrow Assembly
Your kit includes:
1 116-068K 14’ SPRING HARROW ASSEMBLY
1 116-155K 12’EWNT HARROW ARM ASSEMBLY
1 116-280M 706/1006 HARROW MANUAL
Qty. Part No. Part Description
116-279A 1006 Harrow Assembly
Your kit includes:
1 116-070K 20’ SPRING HARROW ASSEMBLY
1 116-155K 12’EWNT HARROW ARM ASSEMBLY
1 116-280M 706/1006 HARROW MANUAL
Qty. Part No. Part Description
14612