Great Plains 2520 Operator Manual - Manual (Page 10)

Folding No-Till Seed Box Agitator 118-591M 8/16/06 8 Great Plains Mfg., Inc.
Section 2 Assembly Instructions & Set-Up
13674
Agitator Shaft Installation
Refer to Figure 2-2 & Figure 2-3: Slide the 3/4" hex shaft
(#1) into the seed box from the outside of each drill box.
As the shaft progresses in, slide the following parts,
starting at the outside, onto the shaft.
•
Sprocket, 19t-3/4" hex bore (#2)
The hub of this sprocket should
be turned towards the center of
the drill.
•
Flangette-47mst (#3)
•
Bearing-3/4" hex bore (#4)
•
Flangette-47mst (#3)
•
Flangette
•
Bearing
•
Flangette
•
Flangette-47mst (#3)
•
Bearing-3/4" hex bore (#4)
•
Flangette-47mst (#3)
•
Flangette
•
Bearing
•
Flangette
•
Flangette
•
Bearing
•
Flangette
•
Lock collar (#5)
Shaft Installation
Figure 2-2
13675
Bearing Assembly
Figure 2-3