Great Plains P16229 Serial No 18007975 2008 - Manual (Page 11)

11 Hydraulic Reset Flatliner
Operating Instructions
1.3 Operational Safety
The machine is to be put in operation only
after instruction has been provided by an
employee of the authorised dealer or an
employee of SIMBA. The “Machine
Registration” form is to be completed and
returned to SIMBA.
All protective and safety equipment, such
as removable protective equipment, must be
in place and functioning reliably before the
machine is put in use.
Check screws and bolts regularly for
tightness and retighten if necessary.
In the event of malfunctions, stop and
secure the machine immediately.
Ensure that any faults are remedied
immediately.
1.3.1 No Liability for
Consequential Damage
The Hydraulic Reset Flatliner has been
manufactured by SIMBA with great care.
However, problems may still occur when it is
used for the intended purpose. This may
include:
• Worn wearing parts.
• Damage caused by external factors.
• Incorrect driving speeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
instructions).
Therefore, it is crucial to always
check your machine before and
during operation for correct
operation.
Compensation claims for damage which has
not occurred to the machine is excluded. This
includes any consequential damage resulting
from incorrect operation.
1.2 Use for the Intended
Purpose
The SIMBA Hydraulic Reset Flatliner is built
using the latest technology and in accordance
with the relevant recognised safety
regulations. However, risks of injury for the
operator or third parties and impairment of
the machine or other tangible assets can arise
during use.
The machine is only to be operated when in
a technically perfect condition and for the
intended purpose, taking into consideration
safety and risks and following the Operating
Instructions. In particular, faults that can
impair safety are to be remedied
immediately.
Original parts and accessories from SIMBA
have been specially designed for this
machine. Spare parts and accessories not
supplied by us have not been tested or
authorised. Installation or use of non-original
SIMBA products may have a detrimental
effect on specific design features of the
machine and affect the safety of machine
operators and the machine itself. SIMBA will
accept no liability for damage resulting from
the use of non-original parts or accessories
.
The SIMBA Hydraulic Reset Flatliner is
designed solely as a cultivation implement.
Use for any other purpose, e.g., as a means
of transport, will be deemed to be improper
use. SIMBA will accept no liability for damage
resulting from improper use. The risk will be
borne solely by the operator.
1. Safety Data