Great Plains 7560 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 19)

Revision Comments Part Description Part No. Ref.
Image No. 00015 dwg
Model 7551 & 7553 OUTSIDE WING FRAME 7' RH 560-122H 1.
Model 7551 & 7553 (shown) OUTSIDE WING FRAME 7' LH 560-123H 1.
Model 7556 & 7558 10' OUTSIDE WING RH 560-111H 1.
Model 7556 & 7558 10' OUTSIDE WING LH 560-112H 1.
Model 7560 OUTSIDE WING 7560 FC RH 560-107H 1.
Model 7560 OUTSIDE WING 7560FC LH 560-108H 1.
Model 7551 & 7553 (shown) C-FRAME 6500FC/7500FC 560-064H 2.
Model 7551 & 7553 (shown) OUTSIDE WING BRACE 560-060H 3.
Rev. 1 Model 7556 & 7558 OUTSIDE WING BRACE 7556FC 560-119H 3.
Rev. 1 Model 7560 OUTSIDE WING BRACE 7560FC 560-120H 3.
Model 7551 & 7553 25" U-BOLT ON STUB-OFFSET 560-061H 4.
Model 7551& 7553 WING WHEEL BRKT RH 560-117H 5.
Model 7551& 7553 WING WHEEL BRKT LH 560-118H 5.
Model 7556, 7558 & 7560 OUTSIDE WING WHEEL BRKT RH 560-115H 5.
Model 7556, 7558 & 7560 OUTSIDE WING WHEEL BRKT LH 560-116H 5.
PIN HINGE 1 1/4 X 6 HRDN PLT 805-378C 6.
Rev. 2 HHCS 3/8-16 X 2 1/4 GR8 SP THD 802-623C 7.
Rev. 1 Changed to 802-623C HHCS 3/8-16 X 2 1/2 GR5 802-114C 7.
Rev. 2 NUT HEX TOP LOCK 3/8-16 PLT 803-123C 8.
Rev. 1 Changed to 803-123C NUT LOCK 3/8-16 NYLON INSERT 803-078C 8.
HINGE, OUTSIDE WING 560-017H 9.
HHCS 1-8 X 6 GR8 PLT SPCL THREAD 802-715C 10.
NUT HEX 1-8 NYLON INSERT PLT 803-038C 11.
HHCS 1-8 X 5 1/2 GR5 802-205C 12.
9 3/4" 180° ROCKER 550-167D 13.
PIN CLEVIS 1 X 3 3/8 USABLE 805-351C 14.
WASHER MACH 1.5 X 1.00 X .075 804-192C 15.
PIN COTTER 3/16 X 2 805-058C 16.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2 806-079C 17.
WASHER LOCK SPRING 5/8 PLT 804-022C 18.
NUT HEX 5/8-11 PLT 803-021C 19.
U-BOLT 5/8-11 X 4 1/32 X 4 1/4 806-179C 20.
5" BOLT-ON STUB 560-019H 21.
HHCS 5/8-11 X 1 1/2 GR5 802-051C 22.
WING LOCK T BRACKET 560-081H 23.
U-BOLT 1/2-13 X 3 1/32 X 5 806-189C 24.
WASHER LOCK SPRING 1/2 PLT 804-015C 25.
NUT HEX 1/2-13 PLT 803-020C 26.
Model 7553 4 X 4 K-FLEX STUB 560-023H 27.
Model 7553 HHCS 1/2-13 X 5 1/2 GR5 802-046C 28.
Model 7551, 7558 & 7560 11" U-BOLT ON STUB (4 X 3 TUBE) 575-538H 29.
Optional, Models 7551 & 7553 GAUGE WHEEL ANGLE MOUNT 560-274H 30.
BUSHING CYL 1 1/4 X 1 X 1 890-005C 31.
12/09/09 - 19 - 560-201P
Table of Contents Part Number Index
Section 2: Frames
Outside Wing Assembly
(Applies to 7551FC F H, 7553FC F H, 7556FC F H, 7558FC F H, 7560FC F H only)