Great Plains 3N4010HDA Parts Manual - Manual (Page 31)

Revision Comments Part Description Part No. Ref.
Image No. dwg27405
HD10P OPENER WELDMENT 298-855H 1.
HFS 1/2-13X6 1/8GR5 PLT 802-745C 2.
PARALLEL ARM PIVOT BUSHING 817-084C 3.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 4.
Used with dual springs 25P UPPER SPRING LINK 198-292D 5.
25 SERIES UPPER PARALLEL ARM 298-513H 6.
SPRING EXT 1.575O.D.X.225 WIRE 807-076C 7.
Used with dual springs 25P LOWER SPRING LINK 198-293D 8.
25P REAR OPENER INNER PIVOT TB 198-295D 9.
25 SERIES LOWER PARALLEL ARM 298-510H 10.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2 806-053C 11.
NUT HEX 5/8-11 PLT 803-021C 12.
25P FRONT OPENER MOUNT WELDMT 298-884H 13.
WASHER LOCK SPRING 5/8 PLT 804-022C 14.
HD10P REAR OPENER MOUNT WELDMT 298-856H 15.
LOCKUP PIN FOR 10HD OPENER 398-456H 16.
PIN LINCH 3/16 X 1 9/16 LONG 805-240C 17.
25P UP FLOAT LIMITER 122-173D 18.
HHCS 3/8-16X1 1/4 GR5 802-079C 19.
WASHER LOCK SPRING 3/8 PLT 804-013C 20.
NUT HEX 3/8-16 PLT 803-014C 21.
Used with single springs 3 13/32 SPRING STRAP 198-240D 22.
04/10/13 - 31 - 196-444P
Table of Contents Part Number Index
Openers
HD10 Series Opener Arms & Mounts
(Applies to 3N-4010HDA only)