Great Plains 2SNG30 Material Rate - Manual (Page 11)

8/17/2006 202-499B
Great Plains Mfg., Inc. 11
16399
Small Seeds Attachment
To calibrate the seeding rate on the optional small seeds
attachment, follow these steps.
Refer to Figure 3
1. The proper small-seeds sprocket arrangement giv-
en different drive types on the main drill box. Ar-
range the sprockets on the small-seeds attachment
according to which drive type you will use on the
main drill box.
Note: For accurate metering on the small seeds attach-
ment, the main drill box sprockets must be set to drive
type 1, 2 or 2A.
2. Set the seed-rate adjustment handle on the small
seeds attachment as indicated by the chart on
Small Seeds Attachment Seed Rate Chart, page
12.
3. Calibrate the small seeds attachment to your mate-
rial by following the steps under Calibration, page 3.
Figure 3
Small Seeds Sprocket Arrangements