Introduction, Models covered, Description of unit – Great Plains 4000TT Operator Manual User Manual
Page 15: Document family, Using this manual, Definitions, Introduction models covered description of unit, Document family using this manual definitions, Models covered description of unit
Great Plains Manufacturing, Inc.
Important Safety Information
11
02/11/2014
586-201M
Introduction
Great Plains welcomes you to our growing family of new
product owners. The Turbo-Till 1200-4000TT have been
designed with care and built by skilled workers using
quality materials. Proper setup, maintenance, and safe
operating practices will help you get years of satisfactory
use from the machine.
Models Covered
Description of Unit
The Series II 1200TT-4000TT Turbo-Till is a one, three or
five section “vertical” tillage tool. Working width ranges
from 12 to 40 feet. The implement is designed to cut and
size residue, till soil for faster seedbed warming, break
up soil crust on hard dried fields while eliminating com-
paction layers.Various finishing attachments are also
available to further smooth, redistribute residue, kill
weeds, and break clods
Document Fam
ily
Using This Manual
This manual will familiarize you with
safety, assembly, operation, adjust-
ments, troubleshooting, and mainte-
nance. Read this manual and follow
the recommendations to help
ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
1200TT
12’ (10in) spacing
1500TT
15’ (10in) spacing
1800TT
18’ (10in) spacing
2400TT
24’ (10in) spacing
3000TT
30’ (10in) spacing
4000TT
40’ (10in) spacing
Figure 1
1800TT Turbo-Till
41478
L
R
U
D
F
B
L
R
586-201Q
Pre-Delivery Manual
586-201M
Operator Manual (this document)
586-201P
Parts Manual
U
D
F
B
L
R