Great Plains 401-516A Installation Instructions - Manual (Page 6)

4 YP Pressure Relief Kits Great Plains Manufacturing, Inc.
401-514M 12/28/2007
Using This Manual
This manual familiarizes you with safety, assembly, oper-
ation, adjustments, troubleshooting, and maintenance.
Read this manual and follow the recommendations to
help ensure safe and efficient operation.
Call-Outs
Definitions
The following terms are used throughout this manual.
Note: Paragraphs in this format provide useful informa-
tion related to the current topic.
IMPORTANT !
Paragraphs in this format present a crucial point of
information related to the current topic. Read and fol-
low the directions to:
- remain safe,
- avoid serious damage to equipment and
- ensure desired field results.
Refer to Figure 1 on page 3
Right-hand and left-hand as
used in this manual are deter-
mined by facing the direction
the machine will travel while in
use unless otherwise stated.
An orientation rose (shown at
right) depicts Up, Right, Back,
Down, Left and Front.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts.
Record your pressure relief kit kit model number here for
quick reference:
Model Number:__________________________
Date Purchased: __________________________
Your Great Plains dealer wants you to be satisfied with
your updated machine. If you do not understand any part
of this manual or are not satisfied with the service
received, please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Two-digit callouts in the range 11-34 refer-
ence new parts from the new parts lists
beginning on page 16. The descriptions
match those on the parts, cartons, bags or
item tags, as well as descriptions your
updated Parts Manual.
to Two-digit callouts in the range 85-89 refer-
ence existing parts removed and reused.
1
11 34
85 89
U
D
L
R
B
F