Great Plains TSF1260 Operator Manual - Manual (Page 73)

Great Plains Manufacturing, Inc. Maintenance and Lubrication 69
01/12/2012 500-642M
Lubrication
Elevator Slide
pads and exposed vertical tube bearing surfaces
Type of Lubrication: Dry graphite or NLGI grade 2
grease
Quantity: coat surface lightly
Swing Arm Weldment
2 zerks each side; 4 total
Type of Lubrication: Grease
Quantity: Until resistance is felt
Ace Pump: (if applicable)
1 zerk
(located on belt idler arm casting)
Type of Lubrication: Grease
Quantity: 3 pumps
50 Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube Intervals (service hours) at
which lubrication is required
27384
10
20417
10
15979
10