Great Plains YP4425A Operator Manual - Manual (Page 58)

54 YP4425A Table of Contents Index Great Plains Manufacturing, Inc.
401-805M Table of Contents Index 2012-02-23
Short-Term Parking
1. Fold markers. See “Folding the Markers” on
page 53.
2. Choose a location with level firm ground. Do not
unhitch on a slope.
3. Raise the planter.See “Raising Planter” on page 26.
4. Fold the planter (optional). See “Folding the
YP4425A Planter” on page 28.
5. Block tires.
6. Re-install the parking stand (“Hitching Tractor to
Planter” on page 15).
Refer to Figure 60 (shown without tractor for clarity)
7.
For the standard 3-point hitch, deploy the two
forward stands
. Remove the inner pin , swing
the stand out, down and vertical around the
bottom pin , and re-insert the pin at .
For hydraulic hitch planters, adjust hitch cylinder to
relieve weight from draw-bar.
8. Insert transport locks on all lift cylinders.
9. Disconnect hydraulic lines. Secure them so that they
do not touch the ground.
10. Disconnect electrical cables, capping where
provisioned.
Figure 60
Deploying 3-Point Stands
26034
7
4
6
5 5
5 4
5
6 7