Great Plains CTA4000HD Assembly Instructions - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2008 Printed 11/07/2008 160-049M
Lock Valve Kit
40ft Conventional Till Heavy Duty Air Drills
Used with:
• CTA4000HD s/n EE1130-
General Information
These instructions explain how to install a Lock Valve Kit.
This kit prevents openers from lowering during transport
or maintenance.
These instructions apply to an installation of:
Each kit upgrades an entire drill. All new parts are used.
Tools Required
• air cart Operator Manual:
ADC1150: 167-058M, 167-101M
ADC2220: 167-073M
ADC2350: 167-085M
• updated drill implement Operator Manual:
160-037M, dated Nov. 2008 or later, and
updated drill Parts Manual:
160-037P, dated Oct. 2008 or later.
• basic hand tools,
• cleaning rags and supplies,
• a line to temporarily secure one loose hose, and a
small amount of hydraulic fluid to replace any lost
during hose disconnection.
Notations and Conventions
“Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Up, Back, Left,
Down, Front, and Right.
Call-Outs
Kit Kit Description
160-048A CTA4000 OPNR TRANSPRT LOCK KIT
When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
!
Figure 1
Lock Valve Installed
29114
U
D
F
B
L
R
Single-digit callouts identify components in
the currently referenced Figure or Figures.
These numbers may be reused for different
items from page to page.
to Two-digit callouts in this range reference new
parts from the new parts list on page 6.
This callout references an affected existing
part from the table on page 6. The descrip-
tion matches that in your Parts Manual.
U
D
F
B
L
R
1
11 15
51